Home › Brick Veneer Installation
We install brick veneers in Atlanta, GA to give your home the classic look of full brick at a fraction of the weight. Our team handles preparation, moisture control, and precise brick veneer layout for lasting performance. Transform accent walls, gables, and entire facades with durable brick veneer siding.
Legendary Masonry Atlanta provides professional brick veneers throughout Atlanta, GA, Georgia and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 470-665-3867 or request your free quote.
Brick veneers that fit Atlanta homes and weather
Brick veneers give you the look and feel of brick without rebuilding your walls, but they have to be installed correctly for Atlanta’s heat, humidity, and heavy summer storms. Legendary Masonry Atlanta focuses strictly on masonry work in the metro area, so we plan each brick veneer installation around local conditions, your existing structure, and how you actually use the space.
We start by looking at what the veneer will attach to. That might be framed walls with sheathing, existing block, old brick, or an interior surface. In older Atlanta homes in neighborhoods like Grant Park or Virginia-Highland, we often find mixed substrates and previous repairs. We check for rot, loose sheathing, water stains, and movement cracks before we even talk about veneer patterns. If the base is not sound or is holding moisture, the veneer will not last, so we correct those issues first.
We also account for Atlanta’s temperature swings and frequent rainstorms. Your veneer needs to handle expansion and contraction, wind-driven rain, and sometimes long stretches of high humidity. That affects the type of moisture barrier we use, the flashing details, and even what day and time we schedule the work so the mortar can cure correctly.
How brick veneer installation actually works
A typical exterior brick veneer installation in Atlanta follows a clear sequence. First, we strip down to a solid substrate. On wood-framed walls, we remove old siding if needed, secure any loose sheathing, and repair damaged areas. Then we install a code-compliant weather-resistive barrier, often in two layers for added protection, and flash critical areas like window heads, sills, doors, and roof-to-wall intersections. This is what keeps wind-driven rain from getting into your framing.
Next, we attach corrosion-resistant metal lath or install brick ties, depending on whether we are setting thin brick veneers with mortar over lath or building a full brick veneer wythe with an air gap. On many Atlanta houses, there is already a framed wall ready for a traditional anchored veneer, so we use brick ties anchored into the studs at the proper spacing to support the veneer and keep the required cavity for drainage.
We then set bricks with a mortar mix suited to the veneer system and the specific brick you choose. Joints must be tooled properly to shed water and avoid hairline cracks. We cut bricks around openings for a tight fit and consistent bond pattern, and we integrate weep holes at the bottom of the veneer and above openings so any water that reaches the cavity can drain out instead of getting trapped. For interior work, such as accent walls in Midtown condos or basements in Decatur, we often use thin brick veneers over lath and scratch coat, which reduces weight and thickness while still giving a real brick surface.
Throughout the project, we protect surrounding landscaping, windows, and driveways and keep staging areas as contained as possible. Once the brick is installed and joints are finished, we clean with appropriate masonry cleaners that will not burn or discolor the brick, then inspect joints, flashing edges, and terminations before we call the job complete.
Material and design options for brick veneers in Atlanta
Brick veneers cover a wide range of looks and budgets. Legendary Masonry Atlanta helps you select materials that fit your home’s style and neighborhood, whether you have a traditional Buckhead house, a modern infill in West Midtown, or a ranch in Smyrna. We work with modular brick, king size brick, and thin brick veneers in multiple textures and colors.
You can choose from tumbled, wire-cut, and smooth face bricks, as well as reclaimed-style veneers that mimic older Atlanta masonry. Color ranges include classic reds, warm earth tones that pair well with stone, and lighter blends that reflect more sunlight, which can be helpful on south-facing walls that see intense heat. For thin brick veneers, we make sure the product is rated for the application, interior or exterior, and compatible with the mortar system.
Joint style makes a big difference in the final look and performance. Common options include tooled concave joints, which seal well against moisture, and flush or raked joints for a more rustic or contemporary effect. We can run the brick in running bond, stacked bond, Flemish style accents, or soldier courses over windows and doors. For Atlanta homeowners who want to update an older façade without upsetting HOA guidelines, we often select a brick and joint combination that coordinates with surrounding homes but tones down heavy or dated colors.
We also discuss whether to leave the brick natural or apply a breathable sealer. With Atlanta’s humidity and pollen, a properly chosen sealer can make future cleaning easier, but it has to allow moisture to escape so the veneer and underlying wall do not trap water.
What drives the cost of brick veneer installation
Several specific factors determine the cost of a brick veneer installation in Atlanta, and Legendary Masonry Atlanta lays them out clearly so you know where your money is going. The first is access and layout. A simple, straight rear wall with easy access from the driveway will always cost less per square foot than a two-story front elevation with gables, bump-outs, and limited staging space on a tight in-town lot.
The second major driver is substrate condition. If we find rot in the sheathing, deteriorated framing at the bottom plate, or poorly installed existing house wrap, we have to correct that before installing brick veneers. These repairs can add time and materials, but skipping them would put new masonry on a failing base. On older Atlanta homes that have had multiple siding replacements, this issue is common and worth planning for.
Material choice also matters. Full brick veneers generally cost more than thin brick systems because of the labor, weight, and foundation support required. Specialty or imported bricks, intricate bond patterns, and detailed trim work such as arches and custom sills increase labor time. On the other hand, a standard running bond with a commonly stocked brick usually gives the best value and availability.
Season and schedule can affect cost slightly. In peak spring and fall seasons, crews are in high demand and lead times are longer. Installing in the hottest summer weeks may require more staging and protection so the mortar does not dry too fast, while winter work sometimes needs cold-weather procedures if temperatures drop. We plan mixes and work hours around Atlanta’s forecast so quality is not compromised.
Common brick veneer problems in Atlanta and how we avoid them
Many veneer failures we repair around Atlanta come from poor detailing, not the brick itself. One frequent issue is trapped moisture behind the veneer, which leads to interior leaks, mold, or efflorescence (white staining on the surface). This usually happens when there is no proper drainage plane, no weep holes, or blocked cavities. Legendary Masonry Atlanta prevents this by using correctly lapped water-resistive barriers, keeping a consistent air gap behind full brick veneers, and installing weeps and vents at the right spacing.
Another problem is cracking or separation between the veneer and windows, doors, or corners. Atlanta’s clay soils move, and houses settle, especially in areas with older foundations. If control joints and proper ties are not in place, or if weep holes are mortared solid, stress has nowhere to go and cracks form. We install expansion joints in long runs as needed, use the correct type of brick ties, and coordinate with any foundation or framing adjustments if we see early signs of movement.
Improper mortar choice is also common. Using a mortar that is too hard for the brick and the substrate can cause the brick to crack instead of the joint absorbing movement. We match mortar types to the veneer system and building age. For older masonry or softer brick, we use mixes that are compatible and breathable. For new construction, we follow manufacturer recommendations and local code.
Finally, poor flashing at roof intersections, chimneys, and window heads often shows up only after a few heavy Atlanta storms. We make it a priority to open up and inspect these transition areas. Where needed, we install new metal or flexible flashing that directs water out through the veneer’s drainage system rather than into the wall.
What Atlanta homeowners should decide before hiring for brick veneers
Before you hire anyone for brick veneer installation, it helps to have a clear plan for scope, details, and long-term maintenance. Legendary Masonry Atlanta walks you through these decisions so you are not guessing. First, decide which areas of the house or property you want to update. Full façade, partial front, chimney, porch columns, and interior accent walls all have different structural needs and costs. We can phase the work so the most visible or vulnerable areas are handled first.
Next, consider whether you are matching existing masonry or starting fresh. In neighborhoods with strict HOA rules or historic review, such as parts of Inman Park or Druid Hills, matching color, size, and texture is critical. We can bring sample boards and, when possible, source brick veneers that closely resemble what you already have. For a full redesign, we will review nearby homes so your new veneer looks intentional instead of out of place.
You should also know how you plan to handle maintenance. Brick veneers hold up very well in Atlanta if they are inspected periodically. We recommend checking caulk at windows and doors every few years, keeping landscaping and soil away from the veneer bottom so weep holes stay open, and washing gently with low-pressure water and mild detergents instead of harsh power washing. If you choose a sealer, we will tell you how often it should be reapplied.
Finally, ask any contractor, including us, about permits, insurance, and references for similar veneer work in the Atlanta area. Brick veneers interact with your structural walls, openings, and sometimes foundations. You want a crew that understands local building codes and inspection expectations. Legendary Masonry Atlanta provides clear proposals that specify veneer type, substrate preparation, flashing details, and cleanup, so you can compare bids on more than just the bottom line.
